Paradyne CSU - Manual (Page 185)

7. Operation and Maintenance
9128-A2-GB20-80 September 2002 7-3
Displaying System Information
Use the Identity screen to view identification information about the FrameSaver
unit. This information is useful if you are purchasing additional or replacement
units and/or making firmware upgrades.
Main Menu
→
Status
→
Identity
View this field . . . To find the . . .
System Name Domain name for this SNMP-managed node (up to 255
ASCII characters).
System Contact Contact person for this SNMP-managed node.
System Location Physical location for this SNMP-managed node.
NAM
NAM Type Type of unit installed, referred to as a network access
module, or NAM (i.e., T1 FR NAM). This card type is
supported by the SNMP SysDescr Object.
Hardware Revision Unit’s hardware version. Format nnnn-nnx consists of a
4-digit number, followed by two digits and one alphabetic
character.
Current Software Revision Software version currently being used by the unit. Format
nn.nn.nn consists of a 6-digit number that represents the
major and minor revision levels.
Alternate Software Revision Software version that has been downloaded into the unit,
but has not yet been implemented. Format is the same as
for the Current Software Revision.
T In Progress indicates that the flash memory is
currently being downloaded.
T Invalid indicates that no download has occurred or
the download was not successful
Serial Number Unit’s 7-character serial number.
Ethernet MAC Address Media Access Control (MAC) address assigned to the
Ethernet port during manufacturing.