Paradyne CSU User Manual
Page 49

4. Configuration Options
9128-A2-GB20-80
September 2002
4-5
Entering System Information and Setting the System Clock
Select System Information to set up or display the general SNMP name for the
unit, its location, and a contact for the unit, as well as to set the system clock.
Main Menu
→
Control
→
System Information
The following information is available for viewing. Save any entries or changes.
NOTE:
To clear existing information, place the cursor in the Clear field (Tab to the
Clear field ) and press Enter.
See
, to set up and administer logins.
If the selection is . . .
Enter the . . .
Device Name
Unique name for device identification of up to 20 characters.
System Name
SNMP system name; can be up to 255 characters.
System Location
System’s physical location; can be up to 255 characters.
System Contact
Name and how to contact the system person; can be up to
255 characters.
Date
Current date in the month/day/year format (mm/dd/yyyy).
Time
Current time in
the hours:minutes format (hh:mm).