Paradyne CSU User Manual
Page 130
4. Configuration Options
4-86
September
2002
9128-A2-GB20-80
Inactivity Timeout
Possible Settings: Enable, Disable
Default Setting: Enable
Determines whether a Telnet session is disconnected after a specified period of keyboard
inactivity.
Enable – Terminates the session after the Disconnect Time expires.
Disable – Does not terminate Telnet session during inactivity.
Disconnect Time (Minutes)
Possible Settings: 1 – 60
Default Setting: 10
Sets the amount of keyboard inactive time allowed before a user session is disconnected.
Display Conditions
– This option does not appear when Inactivity Timeout is disabled.
1 – 60 – Up to an hour can be set.
FTP Session
Possible Settings: Enable, Disable
Default Setting: Enable
Determines whether the system responds as a server when an FTP (file transfer protocol)
client on an interconnected IP network requests an FTP session. This option must be
enabled when downloading files.
Enable – Allows an FTP session between the system and an FTP client.
Disable – Does not allow FTP sessions.
FTP Login Required
Possible Settings: Enable, Disable
Default Setting: Disable
Specifies whether a login ID and password are required for an FTP session. If required,
the login used is the same login used for a menu-driven user interface session. This
option does not affect the TS Access Management Link.
Enable – User is prompted for a login ID and password.
Disable – No login is required for an FTP session.
FTP Max Transfer Rate (Kbps)
Possible Settings: 1 – 1536
Default Setting: 1536
Sets the maximum receive (or send) rate of file transfer to the system via management
PVCs. This option allows new software and configuration files to be downloaded using
selected bandwidth without interfering with normal operation. Using this option, new
software and configuration files can be downloaded quickly using the default settings, or at
a slower rate over an extended period of time by selecting a slower speed. Based upon
TCP flow control, the FTP server in the system throttles bandwidth to match this setting.
1 – 1536 – Sets the download line speed from 1 kilobits per second to the maximum
management speed.
Table 4-20. Telnet and FTP Session Options (2 of 2)