Paradyne CSU - Manual (Page 444)

F. Technical Specifications
F-4 September 2002 9128-A2-GB20-80
Power Consumption
and Dissipation
Built-in power cord
100 – 240 VAC power supply:
FrameSaver SLV 9126
120 VAC power supply:
FrameSaver SLV 9126-II and
9126-II Router
FrameSaver SLV 9128-II
NEMA 5-15P plug
9.1 watts, 60 Hz
±
3, 0.151 A at 120 VAC
±
12
Result: 31.05 BTU per hour
7.3 watts, 60 Hz
±
3, 0.131 A at 120 VAC
±
12
Result: 24.9 BTU per hour
10.3 watts, 60 Hz
±
3, 0.125 A at 120 VAC
±
12
Result: 35.14 BTU per hour
COM Port/Interface –
Communications/Management
Standard
Data rates
25-position (DB25) connector (9126, 9128-II)
9-position (DB9) connector (9126-II and 9126-II Router)
EIA-232/ITU, V.24 (ISO 2110)
9.6, 14.4, 19.2, 28.8, 38.4, 57.6, and 115.2 Kbps
T1 Network Interface
Data rates
Services supported
Physical interface (USA)
Physical interface (Canada)
Framing format
Coding format
Line Build-Out (LBO)
ANSI PRM
Bit stuffing
8-position unkeyed modular USOC RJ48C jack
Up to 1.536 Mbps
Fractional T1 service, frame relay service
RJ48C
CA81A using adapter cable
D4, ESF
AMI, B8ZS
0.0 dB, –7.5 dB, –15 dB, –22.5 dB
Selectable
AT&T TR 62411
DSX-1 Interface
Physical interface
FrameSaver SLV 9126,
9126-II, and 9126-II Router
FrameSaver SLV 9128-II
Framing format
Coding format
DTE line equalization
Send AIS
8-position modular connector with
8-position modular-to-DB15 adapter: D-Sub 15 socket
15-position D-Subminiature connector
D-Sub 15 socket
D4, ESF
AMI, B8ZS
5 selectable ranges from 0 to 655 feet (0 – 196.5
meters)
Selectable
Table F-2. 1-Slot CSU/DSUs and Router Technical Specifications (2 of 3)
Specification Criteria