Paradyne CSU - Manual (Page 324)

10. Setting Up NetScout Manager Plus for FrameSaver Devices
10-10 September 2002 9128-A2-GB20-80
4. Edit any trap defaults that may be required. See Step 4 on page 10-12 of
Adding SLV Alarms Manually for field settings you may want to change.
5. Select the OK button (at the bottom of the screen) to apply your changes. The
window closes and the Configuration Manager main window reappears.
6. Select the Install button (down the center of the Configuration Manager main
window) to apply your changes.
Refer to Editing Alarms in the NetScout Manager/Plus & NetScout Server
Administrator Guide to change alarm thresholds.