Paradyne CSU User Manual
Page 196
7. Operation and Maintenance
7-14
September
2002
9128-A2-GB20-80
Invalid Password
Login is required and an
incorrect password was
entered; access is denied.
T
Try again.
T
Contact your system
administrator to verify your
password.
Invalid Test
Combination
A conflicting loopback or
pattern test was in progress
when Start was selected to
start another test, or was
active on the same or
another interface when
Start was selected.
T
Wait until other test ends and
message clears.
T
Cancel all tests from the Test
screen ( Path: main/ test).
T
Stop the test from the same
screen the test was started
from.
Limit of six Login IDs
reached
An attempt to enter a new
login ID was made, and the
limit of six login/password
combinations has been
reached.
T
Delete another login/password
combination.
T
Reenter the new login ID.
Limit of Mgmt PVCs
reached
New was selected from the
PVC Connection Table and
the maximum number of
management PVCs has
already been created.
T
Do not create the management
PVC.
T
Delete another management
PVC, and try again.
Limit of PVC
Connections reached
New was selected from the
PVC Connection Table and
the maximum number of
PVCs has already been
created.
T
Do not create the PVC
connection.
T
Delete another PVC
connection, and try again.
Name Must be Unique
Name entered for a
management PVC has
been used previously.
Enter another 4-character name
for the logical/management link.
No Destination Link
DLCIs Available
New was selected from the
PVC Connection Table, but
even though DLCIs are
available to form a
connection, no DLCIs are
available on the network
link, which is a suitable PVC
Destination.
Configure additional DLCIs for the
network link and try again.
No DLCIs available for
connection
New was selected from the
PVC Connection Table, but
all configured DLCIs have
been connected.
No action needed, or configure
more DLCIs and try again.
New was selected from the
Management PVCs option
screen, but all Link/DLCI
pairs have been connected.
Configure more network and/or
Port-1 Links/DLCIs pairs and try
again.
Table 7-6.
Device Messages (3 of 6)
Message
What It Indicates
What To Do