Tests available – Paradyne CSU User Manual
Page 282
8. Troubleshooting
8-18
September
2002
9128-A2-GB20-80
Tests Available
The following tests are available to a FrameSaver SLV 9126, 9128, or 9128-II.
Test Menu Example
If the unit does not have the ISDN DBM feature,
ISDN Call
does not appear with
the ISDN PVC Tests.
PRI Physical Tests
only appears when an ISDN PRI
DBM is installed.
PVC Tests menu selections are suppressed when no PVCs have been configured
on the interface. Check that both ends of the cables are properly seated and
secured.
Tests can be commanded from the OpenLane 5.
x management system using its
Diagnostic Troubleshooting graphical interface, as well as from the menu-driven
user interface.
main/test 9128-II
Device Name: Node A 5/26/2000 23:32
TEST
Network PVC Tests
Data Port PVC Tests
ISDN Call/PVC Tests
Network Physical Tests
Data Port Physical Tests
DSX-1 Physical Tests
PRI Physical Tests
IP Ping
Lamp Test
Abort All Tests
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit