Paradyne CSU - Manual (Page 68)

4. Configuration Options
4-24 September 2002 9128-A2-GB20-80
LMI N4 Measurement Period (T3)
Possible Settings: 5, 10, 15, 20, 25, 30
Default Setting: 20
Configures the LMI-defined T3 parameter, which is the time interval (in seconds) that the
network side of the LMI uses to measure the maximum number of status enquiry
messages that have been received (N4) from the user side.
5 – 30 – Specifies the interval of time in increments of 5.
Table 4-1. System Frame Relay and LMI Options (4 of 4)