Paradyne CSU - Manual (Page 362)

B. SNMP MIBs and Traps, and RMON Alarm Defaults
B-14 September 2002 9128-A2-GB20-80
enterpriseMissedSLV-
Down(16) T devFrExtDlciIfIndex
(devFrExt.mib)
T devFrExtDlciDlci
(devFrExt.mib)
T devFrExtDlciMissed-
SLVs (devFrExt.mib)
T devLastTrapString
(devHealthAndStatus.-
mib.)
Received SLV communications
have been missed; SLV Timeout
Error Event Threshold has been
exceeded.
String:
‘SLV down on $ifString due to
excessive SLV packet loss. Total
SLV packets lost is $numLost.’
enterpriseMissedSLV-
Up(116) SLV Timeout Error Event has
been cleared.
String:
‘SLV up on $ifString because SLV
communication was
reestablished. Total SLV packets
lost is $numLost.’
enterprisePath-
Down(19) T ifIndex (RFC 1573)
T devLastTrapString
(devHealthAndStatus.-
mib
A path on the network interface
has become unavailable.
String:
‘Path xxx.xxx.xxx.xxx Down, DLCI
nnnn ’
enterprisePathUp(20) T ifIndex (RFC 1573)
T devLastTrapString
(devHealthAndStatus.-
mib
A path on the network interface
has become available.
String:
‘Path xxx.xxx.xxx.xxx Up,
DLCI nnnn ’
enterprisePrimary-
ClockFail(1) T devLastTrapString
(devHealthAndStatus.-
mib) Operating software has detected
that the primary clock source has
failed.
String:
‘Primary clock failed.’
enterprisePrimary-
ClockFailClear(101) Operating software has detected
that the primary clock source is
operational again.
String:
‘Primary clock restored.’
enterpriseRMON-
ResetToDefault(13) T devLastTrapString
(devHealthAndStatus.-
mib) All RMON-related option changes
have been reset to their default
values.
Default Factory Configuration
settings have been reloaded,
returning RMON-related options
to their original settings.
String:
‘RMON database reset to
defaults.’
Table B-7. enterprise-Specific Traps and Variable-Bindings (2 of 3)
Trap Variable-Bindings Possible Cause