Paradyne CSU - Manual (Page 354)

B. SNMP MIBs and Traps, and RMON Alarm Defaults
B-6 September 2002 9128-A2-GB20-80
NetScout Indexes to the Interface Table (ifTable)
For remote monitoring at sites where FrameSaver units are operating with
NetScout Probes, use the following ifName, ifDescr, and ifIndex.
Table B-2. NetScout Interface Objects Information (1 of 2)
ifName Description ifDescr (ifEntry 2) ifIndex
Frame Relay Logical Layer
Frame Relay 1
Network Frame relay logical link
on the network
interface For the DTE side:
RMON (IN/OUT); Network T1 of
FR DTE; T1 FR NAM;
Hardware Version:
hhhh-hhh
1
For the DCE side:
RMON (IN/OUT); Network T1 of
FR SERVICE; T1 FR NAM;
Hardware Version:
hhhh-hhh
Frame Relay 3
Sync Data
Port 1 Frame relay logical link
on Synchronous Data
Port-1 For the user side:
RMON (IN/OUT); Synchronous
Data Port of FR DTE, Slot:
s ,
Port: 1; T1 FR NAM;
Hardware Version:
hhhh-hhh
3
For the network side:
RMON (IN/OUT); Synchronous
Data Port of FR SERVICE,
Slot:
s , Port: 1; T1 FR NAM;
Hardware Version: hhhh-hhh
Frame Relay 4
Sync Data
Port 2 Frame relay logical link
on Synchronous Data
Port-2 For the user side:
RMON (IN/OUT); Synchronous
Data Port of FR DTE, Slot:
s ,
Port: 2; T1 FR NAM;
Hardware Version:
hhhh-hhh
4
For the network side:
RMON (IN/OUT); Synchronous
Data Port of FR SERVICE,
Slot:
s , Port: 2; T1 FR NAM;
Hardware Version: hhhh-hhh