Paradyne CSU - Manual (Page 235)

7. Operation and Maintenance
9128-A2-GB20-80 September 2002 7-53
Inbound Dropped
Frames
*
Total number of frames transmitted by the far-end device that
were dropped in transit.
The counts continue to increment until the maximum value is
reached (2
32
–2), then the count starts over.
The SLV Delivery Ratio option (see Table 4-4, Service Level
Verification Options, in Chapter 4, Configuration Options ,) must
be enabled for these statistics to appear.
T Above CIR* T The number of frames transmitted by the far-end device that
were above the committed information rate and were
dropped in transit.
T Within CIR * T The number of frames transmitted by the far-end device that
were within the committed information rate, but were dropped
in transit.
T Between CIR&EIR * T The number of frames transmitted by the far-end device that
were between the committed information rate and excess
information rate, and were dropped in transit.
T Above EIR * T The number of frames transmitted by the far-end device that
were above the excess information rate and were dropped in
transit.
Inbound Dropped
Characters * Total number of bytes transmitted by the far-end device that
were dropped in transit.
The counts continue to increment until the maximum value is
reached (2
32
–2), then the count starts over.
The SLV Delivery Ratio option (see Table 4-4, Service Level
Verification Options, in Chapter 4, Configuration Options ,) must
be enabled for these statistics to appear. NA appears instead of
a statistical count if FDR/DDR (Frame Delivery Ratio/Data
Delivery Ratio) information is not being received from the
far-end device.
T Above CIR * T The number of bytes transmitted by the far-end device that
were above the committed information rate and were
dropped in transit.
T Within CIR * T The number of bytes transmitted by the far-end device that
were within the committed information rate, but were dropped
in transit.
T Between CIR&EIR * T The number of bytes transmitted by the far-end device that
were between the committed information rate and excess
information rate, and were dropped in transit.
T Above EIR* T The number of bytes transmitted by the far-end device that
were above the excess information rate and were dropped in
transit.
Table 7-16. SLV Performance Statistics for Multiplexed DLCI (2 of 3)
Statistic What It Indicates
* Only appears for FrameSaver units when the SLV Delivery Ratio option is
enabled.