Siemens ERTEC200 - Manual (Page 37)

17:16 GPIO8_PORT_MODE Port GPIO[8];
19:18 GPIO9_PORT_MODE Port GPIO[9];
21:20 GPIO10_PORT_MODE Port GPIO[10];
23:22 GPIO11_PORT_MODE Port GPIO[11];
25:24 GPIO12_PORT_MODE Port GPIO[12];
27:26 GPIO13_PORT_MODE Port GPIO[13];
29:28 GPIO14_PORT_MODE Port GPIO[14];
31:30 GPIO15_PORT_MODE Port GPIO[15];
GPIO_PORT_MODE_H W/R Addr.: 0x4000_2510 Default: 0x0000_0000
Description Configuration register for GP-IO[31:16]
Function assignment:
00 = Function 0; 01 = Function 1; 10 = Function 2; 11 = Function 3
Bit No. Name Description
1:0 GPIO16_PORT_MODE Port GPIO[16];
3:2 GPIO17_PORT_MODE Port GPIO[17];
5:4 GPIO18_PORT_MODE Port GPIO[18];
7:6 GPIO19_PORT_MODE Port GPIO[19];
9:8 GPIO20_PORT_MODE Port GPIO[20];
11:10 GPIO21_PORT_MODE Port GPIO[21];
13:12 GPIO22_PORT_MODE Port GPIO[22];
15:14 GPIO23_PORT_MODE Port GPIO[23];
17:16 GPIO24_PORT_MODE Port GPIO[24];
19:18 GPIO25_PORT_MODE Port GPIO[25];
21:20 GPIO26_PORT_MODE Port GPIO[26];
23:22 GPIO27_PORT_MODE Port GPIO[27];
25:24 GPIO28_PORT_MODE Port GPIO[28];
27:26 GPIO29_PORT_MODE Port GPIO[29];
29:28 GPIO30_PORT_MODE Port GPIO[30];
31:30 GPIO31_PORT_MODE Port GPIO[31];
GPIO_POLSEL W/R Addr.: 0x4000_2514 Default: 0x0000_0000
Description Interrupt polarity for GPIO interrupts [31/30/1/0]
Bit No. Name Description
31..4 Reserved Reserved
3 POLSEL GPIO31 0: GPIO31 is not inverted to ICU [IRQ5]
1: GPIO31 is inverted to ICU [IRQ5]
2 POLSEL GPIO30 0: GPIO30 is not inverted to ICU [IRQ4]
1: GPIO30 is inverted to ICU [IRQ4]
1 POLSEL GPIO1 0: GPIO1 is not inverted to ICU [IRQ3]
1: GPIO1 is inverted to ICU [IRQ3]
0 POLSEL GPIO0 0: GPIO0 is not inverted to ICU [IRQ2]
1: GPIO0 is inverted to ICU [IRQ2]
GPIO2_ IOCTRL W/R Addr.: 0x4000_2520 Default: 0x0000_1FFF
Description Configuration register for General Purpose IO [44:32]
Bit No. Name Description
31..13 Reserved Reserved
12..0 GPIO2_IOCTRL[44:32] 0: GPIOx = Output, 1: GPIOx = Input
GPIO2_ OUT W/R Addr.: 0x4000_2524 Default: 0x0000_0000
Description Output register for General Purpose IO [44:32]
Bit No. Name Description
31..13 Reserved Reserved
12..0 GPIO2_OUT[44:32] 0: GPIO outputx = 0, 1: GPIO outputx = 1
Copyright © Siemens AG 2007. All rights reserved. 37 ERTEC 200 Manual
Technical data subject to change Version 1.1.0