Spectra Precision ProMark 800 Reference Manual - Manual (Page 399)

387
Query Command Library
Parameters
Example
$PASHQ,ZDA
$GPZDA,162256.27,25,02,2008,+00,00*43
NOTE: The time offset is always reported as null (d5= d6= 0).
Automatic Output
of ZDA Messages
This is a reminder on how to output ZDA messages at regular
intervals of time: Use the $PASHS,NME command with the
syntax below:
$PASHS,NME,ZDA,,ON,
For more details on the $PASHS,NME command, refer to the
Set Command Library Chapter.
As an example, the command below will output ZDA
messages on port A at a rate of 60 seconds:
$PASHS,NME,ZDA,A,ON,60
Parameter Description Range
m1 UTC time (hhmmss.ss)
000000.00-
235959.99
d2 Current day 01-31
d3 Current month 01-12
d4 Current year 0000-9999
d5 Local zone offset from UTC time (hour) -13 to +13
d6 Local zone offset from UTC time (minutes) 00-59
*cc Checksum *00-*FF