Spectra Precision ProMark 800 Reference Manual - Manual (Page 205)

193
Set Command Library
Parameters
Example
Enabling the use of the local coordinate system in the
receiver:
$PASHS,LCS,ON*04
Relevant Query
Commands
$PASHQ,LCS
$PASHQ,PAR
LOG,DEL: Deleting Log Files
Function This command is used to delete log files.
Command Format Syntax
$PASHS,LOG,DEL,d[*cc]
Parameters
Example
Deleting all log files:
$PASHS,LOG,DEL,999*45
Relevant Query
Command
$PASHQ,LOG,LST
Parameter Description Range Default
s1
ON: Local coordinate system used if RTCM
3.1 messages received.
OFF: Coordinate system used is WGS84.
ON, OFF OFF
*cc Optional checksum *00-*FF -
Parameter Description Range
d
Index of the log file you want to delete. Use the
$PASHQ,LOG, LST command to read the index associ-
ated with each existing log file.
Use d=999 to delete all the log files, but the current one.
0 to no
limit
*cc Optional checksum *00-*FF