Spectra Precision ProMark 800 Reference Manual - Manual (Page 259)

247
Set Command Library
• The $PASHS,SOM,WRN command equally affects all
GNSS systems.
Examples
Setting WRN masks for both differential and raw data:
$PASHS,SOM,WRN,ON*6E
Enabling all signal observations to be output regardless of
whether some signals are flagged or not (no WRN mask):
$PASHS,SOM,WRN,OFF*20
Relevant Query
Command
$PASHQ,PAR
$PASHQ,SOM,WRN
See Also $PASHS,SOM
$PASHS,SOM,SNR
$PASHS,SOM,CTT
$PASHS,SOM,NAV
STI: Defining a Station ID
Function This command is used to define the station ID the base
receiver will broadcast in its differential messages to the
rover.
Command Format Syntax
$PASHS,STI,d[*cc]
Parameters
Examples
Defining station ID “150” for use in RTCM messages:
$PASHS,STI,150*23
Parameter Description Range
d Station ID
0-1023 (RTCM 2.3)
0-4095 (RTCM 3.x and ATOM)
0-31 (CMR & CMR+)
*cc Optional checksum *00-*FF