Spectra Precision ProMark 800 Reference Manual - Manual (Page 296)

284
Query Command Library
Comment
The code allotted to a position solution of the SBAS
differential type is either “1” or “9”, depending on the last
$PASHS,NPT command run.
See also $PASHS,NME
$PASHS,NPT
CTS: Handshaking
Function This command allows you to query the handshaking (RTS/
CTS) protocol status for port A. If no port is specified in the
command, the response message is sent back to the port that
issued the query command.
Command Format Syntax
$PASHQ,CTS[,s1][*cc]
Response Format Syntax
$PASHR,CTS,s1,s2*cc
Parameters
Example
$PASHQ,CTS
$PASHR,CTS,ON*1D
Relevant Set
Command
$PASHS,CTS
See also $PASHQ,PRT
$PASHQ,MDP
Parameter Description Range
s1 Queried port A
s2 Current status of RTS/CTS handshaking protocol ON, OFF
*cc Checksum *00-*FF