Spectra Precision ProMark 800 Reference Manual - Manual (Page 352)

340
Query Command Library
Parameters
Example
$PASHQ,PPS
$PASHR,PPS,1,500,R*5D
Relevant Set
Command
$PASHS,PPS
PRT: Baud Rate Settings
Function This command is used to query the baud rate setting for any
of the serial ports used in the receiver.
Command Format Syntax
$PASHQ,PRT[,c1][*cc]
Parameters
Response Format Syntax
$PASHR,PRT,c1,d2*cc
Parameter Description Default Range
f1 Period, in seconds 0 0.0-0.9; 1-60
f2 Offset in milliseconds 0 ±999.9999
c3
Active edge:
• R: Rising
• F: Falling
R R, F
*cc Checksum *00-*FF
Parameter Description Range
c1 Port ID A, C, D, E
*cc Optional checksum *00-*FF