Spectra Precision ProMark 800 Reference Manual - Manual (Page 331)

319
Query Command Library
Parameters
None.
Response format Syntax
$PASHR,LOG,PAR,s1,d2,d3*cc
Parameters
Example
$PASHQ,LOG,PAR*5C
$PASHR,LOG,PAR,OFF,1,20*0F
Relevant Set
Command
$PASHS,LOG,PAR
MDM: Modem Status and Parameters
Function This command is used to query the modem parameters.
Command Format Syntax
$PASHQ,MDM[*cc]
Response Format Syntax
$PASHR,MDM,c1,d2,s3,PWR=s4,PIN=s5,BND=d6,PTC=d7,CBS=d8,APN=
s9,LGN=s10,PWD=s11,IPT=d12,PHN=s13,ADL=c14,RNO=d15,MOD=s16,N
ET=d17*cc
Parameters
Parameter Description Range
s1
Log file control parameter:
• ON: Generation of log files enabled
• OFF: Generation of log files disabled
ON, OFF
d2 Maximum size, in Mbytes 1-90
d3
Number of days during which a log file is kept in mem-
ory.
1-100
*cc Optional checksum *00-*FF
Parameter Description Range
c1 Modem port E
d2 Modem baud rate 9
s3
Modem state
“NONE” means that the modem
option [Z] is not valid.
OFF, ON, INIT, DIALING,
ONLINE, NONE