Spectra Precision ProMark 800 Reference Manual - Manual (Page 338)

326
Query Command Library
Example
$PASHQ,NMO,A
$PASHR,NMO,A,6,001.00,28,ALM,0.00,DTM,0.00,GGA,0.00,GLL,0.00,GNS,
0.00,GRS,0.00,GSA,0.00,GST,0.00,GSV,0.00,HDT,0.00,RMC,0.00,VTG,0.00,
XDR,0.00,ZDA,0.00,ATT,0.00,CRT,0.00,DCR,0.00,DDS,0.00,DPO,0.00,LTN,0
.00,POS,0.00,PTT,0.00,RRE,0.00,SAT,0.00,SGA,0.00,SGL,0.00,SGP,0.00,VE
C,0.00*04
See also $PASHS,NME
NPT: Tagging of SBAS Differential Positions in NMEA & NMEA-
Like Messages
Function This command is used to query the receiver for the current
tagging of all SBAS differential positions solutions in NMEA-
like and NMEA messages the receiver generates.
Command Format Syntax
$PASHQ,NPT[*cc]
Response Format Syntax
$PASHR,NPT,d1,d2*cc
f6
Output rate:
• 0.05 or 0.1 to 0.9 or 1-999: Output rate in
seconds
• 0: Message disabled
0-999.00 s
*cc Checksum *00-*FF
Parameter Description Range