Spectra Precision ProMark 800 Reference Manual - Manual (Page 297)

285
Query Command Library
DBN,MSI: DBEN Message Status
Function This command is used in a base receiver to read the current
settings of the DBEN messages the base currently generates
and outputs.
Command Format Syntax
$PASHQ,DBN,MSI[*cc]
Response Format Syntax
$PASHR,DBN,MSI,d1,RPC,d2,BPS,d3*cc
Parameters
Example $PASHQ,DBN,MSI
$PASHR,DBN,MSI,2,RPC,1.0,BPS,30.0*6B
See also $PASHS,DBN,TYP
$PASHQ,BAS
$PASHQ,CPD,MOD
Parameter Description Range
d1 Number of DBEN messages currently output (always 2) 2
RPC,d2 “RPC” message type output rate, in seconds 0-300
BPS,d3 “BPS” message type output rate, in seconds 0-300
*cc Checksum *00-*FF