Spectra Precision ProMark 800 Reference Manual - Manual (Page 126)

114
Miscellaneous
• Load Config? will first show up if a PAR file is stored on the
USB key.
• Upload Script? will show up after 10 seconds of displaying
Load Config? if the USB key also contains a text file named
“autoconfig.cmd” containing a list of $PASH commands.
• Symbols representing two storage media will show up after
10 seconds of displaying Upload Script? inviting you to
copy the user data (raw data files, log files) from the
internal memory to the USB key.
Note that the first two screens will be skipped if the required
files are not found on the USB key.
While either of these three screens is displayed, you can
either accept the corresponding request by pressing the Log
button (left-hand button), or reject it by pressing the Scroll
button (right-hand button).
When you reject the request, the screen immediately
switches to the next screen.
The receiver will indefinitely continue to browse through the
different possible screens, at the same rate, as long as no
action is taken and the USB key remains connected to the
receiver.
“Load Config?”
Procedure
When the message below appears on the screen, press the
Log button to start the upload procedure:
10 s
10 s
10 s