Spectra Precision ProMark 800 Reference Manual - Manual (Page 356)

344
Query Command Library
Response Format Syntax
$PASHR,QZS,s*cc
Parameters
Example
Reading QZSS tracking:
$PASHQ,QZS
$PASHR,QZS,OFF*xx
Relevant Set
Command
$PASHS,QZS
RAW: Raw Data Logging Settings
Function This command is used to query the raw data recording
parameters.
Command Format Syntax
$PASHQ,RAW[*cc]
Response Format Syntax
(Through an example):
PER:020.00 ELM:10
RAW: MPC DPC PBN SNV SNG SNW SAL SAG SAW ION SBD BAUD
PRTA: ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF 6
PRTC: OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF 1
MEMM: OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF 1
MEMU: OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF 0
Parameter Description Range
s
QZSS tracking status:
• ON: QZSS satellites tracked and used
• OFF: QZSS satellites not tracked
ON or OFF
*cc Optional checksum *00-*FF