Spectra Precision ProMark 800 Reference Manual - Manual (Page 359)

347
Query Command Library
Command Format Syntax
$PASHQ,RCP,REF[*cc]
Parameters
None.
Response format Syntax
$PASHR,RCP,REF,s1,d2*cc
Parameters
Example
$PASHQ,RCP,REF*4B
$PASHR,RCP,REF,ASHTECH,0*38
RDP,CHT: Radio Channel Table
Function This command is used to read the radio channel settings.
Command Format Syntax
$PASHQ,RDP,CHT,c1[*cc]
Parameters
Response Format Syntax
$PASHR,RDP,CHT,s1,d2,n(d3,f4,f5)*cc
Or, if the channel table does not exist: $PASHR,RDP,CHT,s1,0
(Here n=d2)
Parameter Description Range
s1 Reference receiver name
d2
Receiver name preference:
• 0: s1 is ignored if the incoming reference
data contain the reference receiver name
• 1: s1 is always used and the decoded ref-
erence receiver name is ignored.
0, 1
*cc Optional checksum *00-*FF
Parameter Description Range
c1
Serial port used to communicate with the radio (A for
external radio, D for internal radio)
A, D
*cc Optional checksum *00-*FF