Spectra Precision ProMark 800 Reference Manual - Manual (Page 227)

215
Set Command Library
Parameters
Example
Setting the antenna position to 37°22.2912135’N,
121°59.7998217’W and 15.25 m:
$PASHS,POS,3722.2912135,N,12159.7998217,W,15.25*1F
Comments
The $PASHS,POS command will be NAKed if the entered
position is too distant from the computed one.
Relevant Query
Command
$PASHQ,CPD,POS
See also $PASHS,CPD,MOD,BAS
$PASHS,ANH
$PASHS,ANR
PPS: Setting PPS Pulse Properties
Function This command is used to set the period, offset and GPS
synchronized edge (rising or falling) of the PPS pulse.
Command Format Syntax
$PASHS,PPS,f1,f2,c3[*cc]
Parameter Description Range
m1
Latitude in degrees and minutes with 7 deci-
mal places (ddmm.mmmmmmm)
0-90
c2 North (N) or South (S) N, S
m3
Longitude in degrees, minutes with 7 decimal
places (ddmm.mmmmmmm)
0-180
c4 West (W) or East (E) W, E
f5 Height in meters ±0-9999.9999
*cc Optional checksum *00-*FF