Spectra Precision ProMark 800 Reference Manual - Manual (Page 210)

198
Set Command Library
Example
Setting GPRS Configuration:
$PASHS,MDM,PAR,PWR,AUT,PIN,1234,APN,orange.fr,LGN,orange,PWD,
orange,IPT,0,ADL,Y,NET,1*68
Relevant Query
Command
$PASHQ,MDM
See also $PASHS,DIP
$PASHS,NTR
$PASHS,MWD
MDP: Setting Port A to RS232 or RS422
Function This command is used to set port A as an RS232 or RS422
serial port.
Command Format Syntax
$PASHS,MDP,A,c[*cc]
ADL,c11
Auto-dial mode.
When this parameter is set to Yes (Y), the
receiver will do the following when next
turned on:
• if d4=0, the phone number that the
receiver was last communicating with will
be re-dialed automatically.
• if d4=1, a connection to the mount point or
IP server to which the receiver was last
connected will be initiated automatically.
Y, N Y
RNO,d12 Maximum number of re-dials 0-15 2
NET,d13
2G/3G selection:
• 0: Automatic (2G or 3G)
• 1: Forced to 2G
0, 1 0
*cc Optional checksum *00-*FF
Parameter Description Range Default