Spectra Precision ProMark 800 Reference Manual - Manual (Page 224)

212
Set Command Library
Command Format Syntax
$PASHS,PAR,SAV[,d1][*cc]
Parameters
Comments
The command will create a PAR file named as follows:
PM_SSSSS_dddhhmmss.par
Where:
• SSSSS: Last 5 digits from receiver serial number
• ddd: Day number (1.. 366)
• hhmmss: Current time
The command will be rejected ($PASHR,NAK) in the
following cases:
• No USB key detected and d1=2 or is omitted
• Not enough space available on the specified memory
• The PAR file already exists.
Example
Saving the receiver configuration to the USB key:
$PASHS,PAR,SAV*5E
Relevant Query
Command
None.
See also $PASHS,PAR,LOD
Parameter Description Range Default
d1
Memory where the PAR file will be written:
• 0: Internal memory (NAND Flash)
• 2: USB key
If d1 is omitted, the receiver will assume that the
PAR file should be saved to the USB key.
0, 2 2
*cc Optional checksum *00-*FF -