Spectra Precision ProMark 800 Reference Manual - Manual (Page 285)

273
Query Command Library
BTH: Bluetooth Settings
Function This command is used to read the current Bluetooth settings.
Command Format Syntax
$PASHQ,BTH[*cc]
Response Format Syntax
$PASHR,BTH,s1,s2,s3,s4*cc
Parameters
Example $PASHQ,BTH
$PASHR,BTH,00:07:80:83:91:86,PM_743109,-1,ON*68
See also $PASHS,BTH,NAME
$PASHS,BTH,PIN
CFG: GNSS Tracking Configuration
Function This command queries the receiver for the type of GNSS
tracking currently enabled.
Command Format Syntax
$PASHQ,CFG[*cc]
Response Format Syntax
$PASHR,CFG,s1*cc
Parameter Description Range
s1 Bluetooth address (xx:xx:xx:xx:xx:xx) 17 characters
s2 Bluetooth name 64 characters max.
s3 Bluetooth PIN code
0 to 12 digits max.
-1: no PIN code
s4 Bluetooth status ON, OFF
*cc Checksum *00-*FF