Spectra Precision ProMark 800 Reference Manual - Manual (Page 218)

206
Set Command Library
NTR,MTP: Connecting Receiver to NTRIP Caster Mount Point
Function This command allows you to connect the receiver to a NTRIP
caster mount point.
Command Format Syntax
$PASHS,NTR,MTP,s1[*cc]
Parameters
Example
Connecting to mount point MUWF0:
$PASHS,NTR,MTP,MUWF0*4D
If the connection is successful, the following response line
will be returned:
$PASHR,NTR,OK*cc
If the connection failed, the following response line will be
returned:
$PASHR,NTR,FAIL*12
Relevant Query
Command
None.
See also $PASHQ,NTR,TBL
Parameter Description Range
s1
Name of the NTRIP mount point, or OFF command
(ending the connection to the current mount point). 100 characters
max., or OFF
*cc Optional checksum *00-*FF