Spectra Precision ProMark 800 Reference Manual - Manual (Page 195)

183
Set Command Library
Discontinuing the daisy chain mode for all source ports:
$PASHS,DSY,OFF[*cc]
Parameters
Examples
Redirecting port D to port A:
$PASHS,DSY,D,A*3E
Redirecting port D to port A and port A to port D:
$PASHS,DSY,D,A*3E
$PASHS,DSY,A,D*3E
Discontinuing the daisy chain mode from port A:
$PASHS,DSY,A,OFF*35
Discontinuing the daisy chain mode from all source ports:
$PASHS,DSY,OFF*58
DYN: Receiver Dynamics
Function This command allows you to define the receiver dynamics.
The chosen number best represents the receiver motion.
Command Format Syntax
$PASHS,DYN,d1[*cc]
Parameter Description Range
c1 Source port ID A, C, D, E
c2 Destination port ID A, C, D, E
d3
Mode:
• 0: Raw (default). Data are sent to the desti-
nation port as and when they arrive.
• 1: Block. Data are sent to the destination
port only after a complete message has
arrived.
0,1
*cc Optional checksum *00-*FF