Spectra Precision ProMark 800 Reference Manual - Manual (Page 305)

293
Query Command Library
Parameters
Example
Command reporting data on port A forwarded to port C:
$PASHQ,DSY
$PASHR,DSY,A,C*38
Relevant Set
Command
$PASHS,DSY
DTM: Datum Reference
Function This command asks the receiver to output the content of the
NMEA DTM message.
Command Format Syntax
$PASHQ,DTM[*cc]
Parameters
None.
Response Format Syntax
$GPDTM,s1,,f2,c3,f4,c5,f6,s7*cc
Parameter Description Range
c1
Source port:
• A: Serial port
• C: Bluetooth port
• D: Radio
• E: Modem
A, C, D, E
c2
Destination port:
• A: Serial port
• C: Bluetooth port
• D: Radio
• E: Modem
A, C, D, E
d3
Mode:
• 0: Raw (default)
• 1: Block
0,1
*cc Checksum *00-*FF