Spectra Precision ProMark 800 Reference Manual - Manual (Page 215)

203
Set Command Library
Parameters
Example
Disabling all NMEA and NMEA-like messages on port A:
$PASHS,NME,ALL,A,OFF*50
NME,PER: Setting Unique Output Rate for all NMEA Messages
Function This command is used to set the same output rate for all
NMEA and NMEA-like messages. This command will
overwrite all the output rates set individually for each
message type using $PASHS,NME,xxx.
Command Format Syntax
$PASHS,NME,PER,f[*cc]
Parameters
Example
Setting the output rate to 1 second:
$PASHS,NME,PER,1*45
Relevant Query
Command
$PASHQ,NMO
See also $PASHS,NME
$PASHS,POP
Parameter Description Range
c1
Port ID
A: Serial portC: Bluetooth port
E: Modem
M, U: Memory
A, C, E, M, U
*cc Optional checksum *00-*FF
Parameter Description Range Default
f
Output rate.
Setting $PASHS,POP to “20”
is a prior condition to operat-
ing at 0.05 s (20 Hz). 0.05 s or 0.1-0.4 s with
[F] option activated.
0.5-0.9 s
1-999 s
1 s
*cc Optional checksum *00-*FF