Spectra Precision ProMark 800 Reference Manual - Manual (Page 185)

173
Set Command Library
Parameters
Example
Setting the receiver to process GPS and GLONASS network
corrections:
$PASHS,CPD,NET,1,1*51
Relevant Query
Command
$PASHQ,CPD,NET
CPD,REM: Differential Data Port
Function This command sets the reception mode for all differential
data.
If Automatic is chosen, all received differential data is
processed whatever the input ports.
On the contrary, if Manual is chosen, only the data coming in
through the specified ports (one or two ports) will be
processed.
Command Format Syntax
$PASHS,CPD,REM,s1[,c2][,c3][*cc]
Parameter Description Range Default
d1
RTK network operating mode relative to
GPS corrections:
• 0: GPS corrections from network are not
used.
• 1: FKP/MAC GPS corrections from net-
work are used when available and
healthy, otherwise they are rejected.
0-1 1
d2
RTK network operating mode relative to
GLONASS corrections:
• 0: GLONASS corrections from network
are not used.
• 1: FKP/MAC GLONASS corrections from
network are used when available and
healthy, otherwise they are rejected.
0-1 1
*cc Optional checksum *00-*FF