Spectra Precision ProMark 800 Reference Manual - Manual (Page 167)

155
Set Command Library
ATOM PVT messages contain the following sub-blocks: COO,
ERR, VEL, CLK, LCY, HPR, BLN, MIS, PRR and SVS.
DAT messages are generated every time a new frame is
decoded.
Example
Enabling ATOM message type PVT on serial port A at a 1-
second output rate:
$PASHS,ATM,PVT,A,ON,1*0E
Relevant Query
Commands
$PASHQ,ATO
$PASHQ,ATM
See also $PASHS,ATM,PER
$PASHS,ATM,ALL
ATM,ALL: Disabling All ATOM Messages
Function This command disables all ATOM messages currently enabled
on the specified port.
Command Format Syntax
$PASHS,ATM,ALL,c1,OFF[*cc]
Parameters
Example
Disabling all ATOM messages on port A:
$PASHS,ATM,ALL,A,OFF*4E
Relevant Query
Command
None.
See also $PASHS,ATM
Parameter Description Range
c1
• Port related to the ATOM message(s) you
want to disable.A: Serial port
• C: Bluetooth port
• E: Modem
• M, U: Internal memory (M), USB key (U) A, C, E, M, U
*cc Optional checksum *00-*FF