Spectra Precision ProMark 800 Reference Manual - Manual (Page 191)

179
Set Command Library
Examples
Terminating the current connection:
$PASHS,DIP,OFF*4B
Relevant Query
Command
$PASHQ,MDM
See also $PASHS,DIP
$PASHS,DIP,PAR
$PASHS,DIP,ON
DIP,ON: Establishing the Programmed Direct IP Connection
Function This command is used to establish the programmed Direct IP
connection.
Command Format Syntax
$PASHS,DIP,ON[,c1][*cc]
Parameters
None.
Examples
Establishing the programmed Direct IP connection:
$PASHS,DIP,ON*05
Relevant Query
Command
$PASHQ,MDM
See also $PASHS,DIP
$PASHS,DIP,PAR
$PASHS,DIP,OFF
DIP,PAR: Setting Direct IP Parameters
Function This command is used to set the different parameters
allowing the receiver to perform a Direct IP connection to an
external server, typically a base.