Spectra Precision ProMark 800 Reference Manual - Manual (Page 284)

272
Query Command Library
BRD: RTC Bridge
Function This command allows you to list the current settings of the
RTC Bridge function.
Command Format Syntax
$PASHQ,BRD[*cc]
Response format Syntax
$PASHR,BRD,s1,d2,c3,c4*cc
Parameters
Example
$PASHQ,BRD
$PASHR,BRD,ON,0,E,A*15
Relevant Set
Command
$PASHS,BRD
Parameter Description Range
s1
Availability of RTK corrections on the specified out-
put port:
• OFF: No RTK corrections forwarded to the output
port.
• ON: RTK corrections forwarded to the output
port.
ON, OFF
d2
Use of RTK corrections in the receiver’s position
computation.
• 0: RTK corrections used
• 1: RTK corrections not used
0, 1
c3
Input port ID (port from which RTK corrections are
available in the receiver).
E (modem)
c4
Output port ID (serial port to which the licence-free
radio transmitter is connected).
A
*cc Checksum *00-*FF