Spectra Precision ProMark 800 Reference Manual - Manual (Page 335)

323
Query Command Library
See also $PASHQ,CTS
MEM: Selected Memory Device
Function This command is used to query the memory device used by
the receiver.
Command Format Syntax
$PASHQ,MEM[*cc]
Response Format Syntax
$PASHR,MEM,d[*cc]
Parameters
Example
$PASHQ,MEM
$PASHR,MEM,0*2D
Relevant Set
Command
$PASHS,MEM
See also $PASHQ,FLS
MWD: Modem Watchdog Timeout
Function This command is used to query the current setting for the
modem watchdog timeout.
If no data is received or sent through its port over a period of
time equal to this timeout, the modem will automatically
hang up.
Command Format Syntax
$PASHQ,MWD[*cc]
Parameter Description Range
d
Memory used:
• 0: Internal memory (NAND Flash)
• 2: USB mass storage key
0, 2
*cc Checksum *00-*FF