Honeywell DCP552 Mark II - Manual (Page 89)

6-7
● Message key function (when variable parameter PA03 is set to 0)
Cycles through the message panel displays.
• When CH1 is displayed: Display C1, display C2, display C3, display C4,
display C5, display C6, display C1.
• When CH2 is displayed: Display C1, display C2, display C3, display C4,
display C5, display C6, display C1.
Handling Precautions
• Models with CP computation compensation the CH2 PV values have
the following meaning depending on variable parameter PA44 settings.
• When PA44 is set to 0: CP value (unit: %) or PO 2 values (unit 10 -20 atm)
• When PA44 is set to 1: millivolt voltage value (unit: mV)
• When PA44 is set to 2: O 2 sensor impedance value (unit: kΩ)
1 8 0 : 0 1
0 to 100% OUT graph
Ð5 to 105% OUT value
Ð5 to 5% FS graph
Ð999.9 to 999.9% FS value
■ 0 to 100% progress graph
Time display in hours and minutes
Elapsed time Remaining time
Displays events 1 to 8 from the left.
Displays events 9 to 16 from the left.
■ indicates that events are on and
_ indicates that they are off.
The [ ] displays the 8-character tag.
CH2 PV value
CH2 SP value
O U T
D E V
T I M E
E V E N T
P V 2 1 1 2 2 . 3
S P 2 1 1 0 0 . 0
P V 1 1 0 1 0 . 2
S P 1 1 0 0 0 . 0
CH1 PV value
CH1 SP value
7 0 . 5 % O U T
3 . 1 % F S
0 1 9 : 5 9
1 - 1 6
T A G [ P R O G 0 1 ]
■■ ■
■■■
■■■■■■■
Chapter 6. OPERATION
● Display C1
● Display C2
● Display C3
● Display C4
● Display C5
● Display C6
● Display C7