Honeywell DCP552 Mark II - Manual (Page 4)

ii
Configuration of This User’s Manual
This manual is organized as follows.
Chapter 1. PRODUCT OUTLINE
This chapter explains the use and features of the DCP552 and provides the basic
function block and product model numbers.
Chapter 2. NAMES AND FUNCTIONS OF PARTS
This chapter gives the names and functions of parts of the DCP552 , and input
type and range number.
Chapter 3. INSTALLATION AND MOUNTINGS
This chapter describes the procedure for mounting the DCP552 onto an operation
console.
We strongly urge persons responsible for device design on the
DCP552 read this
chapter.
Chapter 4. WIRING
This chapter describes the wiring procedure and precautions required for installing
the
DCP552 .
We strongly urge persons responsible for device design and wiring of the
DCP552 read this chapter.
Chapter 5. FUNCTIONS
This chapter explains detailed functions of the DCP552 .
We strongly urge persons responsible for control design on the DCP552 read this
chapter.
Chapter 6. OPERATION
This chapter gives the selections of the basic display, program selection, operation,
and other information.
We strongly urge persons responsible for device design and operation on the
DCP552 read this chapter.
Chapter 7. PARAMETER SETUP
This chapter describes the parameter setting method of the DCP552 and the
meaning of settings.
Chapter 8. PROGRAM SETUP
This chapter describes the program setting method of the DCP552 and the
meaning of settings.
Chapter 9. MEMORY CARD OPERATION
This chapter describes how to use memory cards.
Chapter 10. TROUBLESHOOTING
This chapter describes checkpoints and countermeasures when the DCP552 is not
operating normally.
Chapter 11. SPECIFICATIONS
This chapter gives the general specifications, performance specifications and the
external dimensions of the
DCP552 .
Chapter 12. CALIBRATION
This chapter describes calibration procedures for the functions of the DCP550 .