PLANET CS-1000 - Manual (Page 52)

Multi-Homing Security Gateway User’s Manual
Step 1. Click WAN under the Address menu to enter the WAN window. The current setting
information, such as the name of the WAN network, IP and Netmask addresses will show on the
screen.
ÍÍ
Definitions
Name : Name of WAN network address.
IP/Netmask : IP address/Netmask of WAN network.
Configure : Configure the settings of WAN network. Click Modify to change the settings of WAN network.
Click Remove to delete the setting of WAN network.
NOTE: In the WAN window, if one of the members has been added to Policy or WAN Group, the Configure
column will show the message – In Use. In this case you are not allowed to modify or remove the settings.
Adding a new WAN Address
Step 1. In the WAN window, click the New Entry button.
Step 2. In the Add New Address window, enter the settings for a new WAN network address.
Step 3. Click
OK to add the specified WAN network or click Cancel to discard changes.
Modifying an WAN Address
Step 1. In the WAN table, locate the name of the network to be modified and click the Modify option in
its corresponding Configure field.
- 46 -