PLANET CS-1000 - Manual (Page 151)

Multi-Homing Security Gateway User’s Manual
Step 11. In To Destination table, fill company A’s subnet IP and mask, 192.168.10.0 and 255.255.255.0
respectively.
Step 12. In Tunnel, select VPN_B tunnel Available Tunnel, and click the Add>> button to add it to the Select
Tunnel .
Step 13. Click OK to finish the Trunk setting of Company B.
Step 14. If you want to configure bi-direction VPN connection, you should enable Trunk setting in Outgoing
and Incoming Policy.
Outgoing Policy:
Incoming Policy:
- 145 -