PLANET CS-1000 - Manual (Page 176)

Multi-Homing Security Gateway User’s Manual
Entering the DMZ To WAN window:
Click DMZ To WAN under Policy menu and the DMZ To WAN table appears displaying currently defined
DMZ To WAN policies.
The fields in the DMZ To WAN window are:
Source: Source network addresses which are specified in the DMZ section of the Address
window.
Destination: Destination networks, which is the WAN network address
Service: Services supported by Servers of WAN networks.
Action: Control actions, to permit or deny packets from the DMZ network to WAN networks
travelling through the Multi-Homing Security Gateway.
Option: Specify the monitoring functions on packets from the DMZ network to WAN networks
travelling through the Multi-Homing Security Gateway.
Configure: Modify settings or remove policies
Move: This sets the sequence of the policies, number 1 being the first policy to proceed.
Adding a DMZ To WAN Policy:
Step 1: Click the New Entry button and the Add New Policy window will appear.
- 170 -