PLANET CS-1000 - Manual (Page 32)

Multi-Homing Security Gateway User’s Manual
3.1.7 Route Table
In this section, the Administrator can add static routes for the networks.
Entering the Route Table screen
Step 1. Click System on the left hand side menu bar, then click Route Table below the Configure
menu. The Route Table window appears, in which current route settings are shown.
ÍÍ
Route Table functions
„
Interface: Destination network, LAN or WAN networks.
„ Destination IP / Netmask: IP address and subnet mask of destination network.
„ Gateway: Gateway IP address for connecting to destination network.
„ Configure: Change settings in the route table.
Adding a new Static Route
Step 1. In the Route Table window, click the New Entry button.
Step 2. In the Add New Static Route window, enter new static route information.
Step 3. In the Interface field’s pull-down menu, choose the network to connect (LAN, WAN, DMZ).
Step 4. Click
OK to add the new static route or click Cancel to cancel.
Modifying a Static Route:
Step 1. In the Route Table menu, find the route to edit and click the corresponding Modify option in the
- 26 -