PLANET CS-1000 - Manual (Page 213)

Multi-Homing Security Gateway User’s Manual
ÍÍ
Log Mail Configuration : When the Log Mail files accumulated up to 300Kbytes, router will notify
administrator by email with the traffic log and event log.
NOTE : Before enabling this function, you have to configure E-mail Settings in System -> Settings.
Syslog Settings : If you enable this function, system will transmit the Traffic Log and the Event Log
simultaneously to the server which supports Syslog function.
NOTE: To restart Connection Log, click the Refresh button on the right hand side in Log window.
Enable Log Mail Support & Syslog Message
Log Mail Configuration /Enable Log Mail Support
Step 1. Firstly, go to Admin –Select Enable E-mail Alert Notification under E-Mail Settings. Enter the
e-mail address to receive the alarm notification. Click OK.
Step 2. Go to Log ÆLog Backup. Check enable Log Mail Support. Click OK.
Syslog Settings/Enable Syslog Message
Step 1. Check to enable Syslog Message. Enter the Host IP Address and Host Port number to send
out message to syslog server.
Step 2. Click
OK .
- 207 -