PLANET CS-1000 - Manual (Page 104)

Multi-Homing Security Gateway User’s Manual
Step 2. Configure the parameters
„ Name: Specify the Trunk name. This should be unique and can not be the same as the
name of IPSec Autokey rule.
„ Source Subnet: Specify the source LAN network subnet.
„ Destination Subnet: Specify the destination LAN network subnet.
„ Tunnel: Indicate the Tunnel type for IPSec or PPTP.
„ Configure Click Modify to modify the Trunk settings, Pause to stop the VPN tunnel, or
Remove to remove the item.
Adding a Trunk
Step 1. Select
VPN
→Tunnel.
Step 2. Configure the parameters
„ Name: Specify the Trunk name. This should be unique and can not be the same as the
name of IPSec Autokey rule.
- 98 -