PLANET CS-1000 - Manual (Page 20)

Multi-Homing Security Gateway User’s Manual
Step 2. In IP Address field, enter the LAN IP address or WAN IP address.
„ Name : Enter the host name for the authorized IP address.
„ IP Address : Enter the LAN IP address or WAN IP address.
„ Netmask : Enter the netmask of LAN/WAN.
„ Ping : Select this to allow the external network to ping the IP Address of the Firewall.
„ HTTP : Check this item, Web User can use HTTP to connect to the Setting window of
Multi-Homing Security Gateway.
Step 3. Click
OK to add Permitted IP or click Cancel to discard changes.
Modify Permitted IPs Address
Step 1. In the table of Permitted IPs, highlight the IP you want to modify, and then click Modify.
Step 2. In
Modify Permitted IPs , enter new IP address.
Step 3. Click
OK to modify or click Cancel to discard changes.
Remove Permitted IPs Addresses
Step 1. In the table of Permitted IPs, highlight the IP you want to remove, and then click Remove.
Step 2. In the confirm window, click OK to remove or click Cancel to discard changes.
- 14 -