PLANET CS-1000 User Manual
Page 166
Multi-Homing Security Gateway User’s Manual
Step 2:
Configure all the parameters.
Source Address:
Select the name of the LAN network from the drop down list. The drop down list
contains the names of all LAN networks defined in the LAN section of the Address menu. To create a
new source address, please go to the LAN section under the Address menu.
Destination Address:
Select the name of the WAN network from the drop down list. The drop down
list contains the names of all WAN networks defined in the WAN section of the Address window. To
create a new destination address, please go to the WAN section under the Address menu.
Service:
Specified services provided by WAN network servers. These are services/application that
are allowed to pass from the LAN network to the WAN network. Choose ANY for all services.
Schedule:
Select the item listed in the schedule to enable the policy to automatically execute the
function in a certain time and range.
Authentication User:
Select the item listed in the Authentication User to enable the policy to
automatically execute the function in a certain time and range.
Trunk:
Check to allow VPN traffic passing through.
Action:
Select Permit or Deny ALL from the drop down list to allow or reject the packets travelling
between the source network and the destination network.
Traffic Log:
Check to enable flow monitoring.
Statistics:
Check to enable flow statistics.
IDP:
Check to enable IDP feature.
Content Blocking:
Check to enable Content Blocking.
Max. Concurrent Sessions:
The maximum concurrent sessions that allows passing through
CS-1000. 0 means it is unlimited.
QoS:
Select the item listed in the QoS to enable the policy to automatically execute the function in a
- 160 -