PLANET CS-1000 - Manual (Page 172)

Multi-Homing Security Gateway User’s Manual
Step 3. When Policy is paused, administrator can modify the Policy Object without removing the Policy.
3.4.3 WAN To DMZ & LAN To DMZ
This section describes steps to create policies for packets and services from the WAN networks to the DMZ
networks. Please follow the same procedures for LAN networks to DMZ networks.
Enter [WAN To DMZ] or [LAN To DMZ] window:
Click WAN To DMZ under Policy menu to enter the WAN To DMZ window. The WAN To DMZ table will show
up displaying currently defined policies. Before to set up WAN To DMZ rule, you need to enable DMZ first.
The fields in WAN To DMZ window:
Source: Source networks, which are addresses specified in the WAN section of the Address
menu, or all the WAN network addresses.
Destination: Destination networks, which are addresses specified in DMZ section of the
Address menu and Mapped IP addresses of the Virtual Server menu.
Service: Services supported by servers in DMZ network.
Action: Control actions, to permit or deny packets from WAN networks to DMZ travelling
- 166 -