PLANET CS-1000 - Manual (Page 47)

Multi-Homing Security Gateway User’s Manual
ÍÍ
Definition
Name : Name of LAN network address.
IP / Netmask : IP address and subnet mask of LAN network
MAC Address : MAC address corresponded with LAN IP address.
Configure : You can configure the settings in LAN network. Click Modify to change the parameters in LAN
network. Click Remove to delete the settings.
In the LAN window, if one of the members has been added to Policy or LAN Group, the Configure column
will show the message – In Use. In this case, you are not allowed to modify or remove the setting.
Adding a new LAN Address
Step 1. In the LAN window, click the New Entry button.
Step 2. In the Add New Address window, enter the settings of a new LAN network address.
Step 3. Click
OK to add the specified LAN network or click Cancel to cancel the changes.
If you want to enable Get Static IP address from DHCP Server function, enter the MAC Address then check
the Get Static IP address from DHCP Server.
Modifying an LAN Address
- 41 -