PLANET CS-1000 - Manual (Page 26)

Multi-Homing Security Gateway User’s Manual
3.1.5 Date/Time
Synchronizing the Multi-Homing Security Gateway with the System Clock
Administrator can configure the
Multi-Homing Security Gateway’s date and time by either syncing to an
Internet Network Time Server (NTP) or by syncing to your computer’s clock.
Follow these steps to sync to an Internet Time Server
Step 1. Enable synchronization by checking the box .
Step 2. Click the down arrow to select the offset time from GMT.
Step 3. Enter the Server IP Address or Server name with which you want to synchronize.
Step 4. Update system clock every minutes You can set the interval time to synchronize with
outside servers. If you set it to 0, it means the device will not synchronize automatically.
Follow this step to sync to your computer’s clock.
Step 1. Click on the Sync button.
Click OK to apply the setting or click Cancel to discard changes.
- 20 -