PLANET CS-1000 User Manual
Page 170
Multi-Homing Security Gateway User’s Manual
Step 2:
Configure the parameters
Source Address:
Select names of the WAN networks from the drop down list. The drop down
list contains the names of all WAN networks defined in the WAN section of the Address menu.
To create a new source address, please go to the LAN section under the Address menu.
Destination Address:
Select names of the LAN networks from the drop down list. The drop
down list contains the names of IP mapping addresses specified in the Mapped IP or the Virtual
Server
sections of Virtual Server menu. To create a new destination address, please go to the
Virtual Server
menu.
Service:
Specified services provided by LAN network servers. These are services / application
that are allowed to pass from the network to the LAN network. Choose ANY for all services.
Schedule:
Select the item listed in the schedule to enable the policy to automatically execute
the function in a certain time and range.
Trunk:
Check to allow VPN traffic passing through.
Action:
Select Permit or Deny ALL from the drop down list to allow or reject the packets
travelling between the specified WAN network and Virtual Server/Mapped IP.
Traffic Log:
Select Enable to enable flow monitoring.
Statistics:
Select Enable to enable flow statistics.
IDP:
Check to enable IDP feature.
Max. Concurrent Sessions:
The maximum concurrent sessions that allows to pass through
CS-1000. 0 means it is unlimited.
QoS:
Select the item listed in the QoS to enable the policy to automatically execute the function
in a certain time and range.
NAT:
Select enable to allow WAN user or DMZ user to access LAN resource using with LAN
interface’s IP address.
Step 3:
Click OK to add new policy or click Cancel to cancel adding new incoming policy.
Modifying Incoming Policy
Step 1:
In the Incoming window, locate the name of policy desired to be modified and click its corresponding
Modify option in the Configure field.
Step 2:
In the Modify Policy window, fill in new settings.
Step 3:
Click OK to save modifications or click Cancel to cancel modifications.
- 164 -